XOLO ONE 8GB model 4GB Repartition Guide

Things Required :-

1. XOLO ONE 8GB Model

2. Any stock / custom rom Based on kitkat

3. SP flash Tools,ROOTED XOLO ONE MOBILE

4. PC

5. EBR files

6…..goes on…

Steps :- VIA PC:-

1. Download the EBR Files and scatter files from here….

2. Download SP Flash Tools..

3. Install MT6582M drivers

4. Open Sp flash tools and load up the scatter files…

5. Select EBR1 and link the ebr1 file and do the same for ebr2

6. Now click download

7. Connect your phone without battery (Switched off)

8. You should see a tick mark and success message…then disconnect your phone and boot again…

9. If it boots up properly you are good to go..or else just restore the Nandroid backup you took… and you would get a re partitioned phone..

* if the internal sd card after formatting gets mounted as read only… then go to ctr recovery and wipe cache and wipe dalvik cache and reboot the phone… everything will be alright… after all your apps get optimized
10. Hit Thanks for me…

:-Steps :- 

FLASH STOCK KK,LP ROM,

CUSTOM ROM THAT SUPPORT XOLO ONE 8GB MODEL

THEN ROOT

,INSTALL CUSTOM RECOVERY

FLASH  VIA RECOVERY MODE

MY GIVEN EBR 4GB FILE

MOST IMPORTANT

MUST FORMAT YOUR DEVICE AFTER FLASH THIS PATCH,

CLEAN Cache

download link

coming comming:

s011 kk scatter spf file 

s007 scatter spt file

LP S007 EBR 4GB FILE

S011 KIKAT EBR 4GB FILE